
If it doesn’t start, turn everything back off and let it charge up a little bit more. When you crank the bike, only let it crank for a second or two. If it does then it’s time to try to start up the motorcycle. Just simply connecting the two without starting the car should be enough to charge the motorcycle fully.Īfter the car and the motorcycle have been connected for about a minute, go ahead and turn the key to the motorcycle and make sure that everything illuminates.

A bike is going to be very different since the battery is much smaller. With a car you want the good car battery to be running and maybe even revving the engine to help charge. This is different than when you are jump starting a car. Once the battery is connected, don’t do anything. This can give a safer charge, and again, helps to make sure that you don’t short out either battery. Put it on some exposed metal on the frame or the engine of the bike. When you connect the ground side of the motorcycle, try to not directly clamp it to the terminal of the battery. The reason you want to do it in this order is so that you don’t accidentally short out the car’s battery and are left with no way to start either the car or the motorcycle. Remember, red is positive and black is negative. Once you have the cables out, connect the positive side of the batteries together, and then connect the ground side of the car battery, followed by the ground side of motorcycle battery. You can use car cables, but keep in mind that to reach your bike’s terminals, it might be difficult with the size of the car clamps. For the cables that you use, it’s recommended to use motorcycle specific cables. Find some jumper cables and have the batteries near each other. First, make sure that the car and bike are BOTH turn off.
#JUMP A CAR HOW TO#
Click here to learn more about how to push start a motorcycle.Īfter you verified that your bike’s battery is dead and that you’re only left to use a car, let’s make sure that you have it set up right. Make sure you have space and that the computer is able to turn on, and then try to give your bike a push start. If you’ve narrowed it down to battery failure, then you’re ready to take the next step, seeing if you can push start your motorcycle.

What I mean is make sure that it has gas, that the switches are turned correctly, and that the kickstand/ gear selector are in the right positions. The first step when jump starting anything, whether it’s a street bike, dirt bike, four-wheeler or car, is make sure that you know why it won’t start. How To Jump Start A Motorcycle With A Car So, if you’re stuck and only have a car and some cables, don’t be afraid, but instead be cautious and make sure that you do it right. If the battery that is on your bike is a 12 volt system, and the one that is in the car is also a 12 volt system (which most of them do), then charging your motorcycle should be relatively easy and pretty effective. When given the right amount of power, a motorcycle with a dead battery can be good as new. This can be done safely when it’s done right a car can give off more power than a motorcycle needs, but nonetheless has power to give. If you don’t have a way to start your motorcycle other than your buddy’s car and some jumper cables, then proceed with caution. Using a car battery can cause damage, so before you try to use one, make sure that you’ve tried other methods first. Why (And When) It’s Okay To Jump Start A Motorcycle With A CarĪ lot of people recommend staying away from jump starting a motorcycle using a car battery, and generally I agree with this statement.
#JUMP A CAR FULL#
So, how do we properly start a motorcycle with a car? What should be stay away from? Are there ways to check to see if damage was done after the motorcycle is started? Keep reading for a full explanation.

Motorcycles and other sporting vehicles usually have batteries that are much smaller capacity than cars. When a car is running, the voltage can run high enough to damage the electronics that are on a motorcycle, but if you’re careful, jumping it with a car is a valid option. This method should be used as a last resort as there are a lot of risks to the motorcycle. So, can you jump start a motorcycle with a car? It is possible to jump start a motorcycle with a car. Push starting your motorcycle is a great option, but sometimes if the battery is dead enough, even a push start won’t be able to get it to turn over and you’ll need to resort to using other vehicles to help you get your motorcycle started again. Recently we’ve outlined different ways to start a motorcycle, specifically on how to push it, whether you’re fuel injected or carbureted. Some are true, but some are just old wives tales. You’ve probably all have heard different do’s and don’ts when it comes to starting a motorcycle.
